En-31
Englsh
The greater the Spread Spectrum value s, the greater the EMI s reduced, and the 
system wll become less stable. For the most sutable Spread Spectrum value, please 
consult your local EMI regulaton.
Remember to dsable Spread Spectrum f you are overclockng because even a slght 
jtter  can  ntroduce  a  temporary  boost  n  clock  speed  whch  may  just  cause  your 
overclocked processor to lock up.
Adjust CPU Rato
Ths tem s used to adjust CPU clock multpler (rato). It s avalable only when the 
processor supports ths functon.
Adjusted CPU Frequency
It shows the adjusted CPU frequency. Read-only.
Adjust CPU-NB Rato
Ths tem s used to adjust CPU-NB rato.
Adjusted CPU-NB Frequency
It shows the adjusted CPU-NB frequency. Read-only.
DRAM Frequency
Ths tem s used to adjust the DRAM frequency. Settng to [Auto], the system wll detect 
the DRAM Frequency automatcally.
Adjusted DRAM Frequency
It shows the adjusted Memory frequency. Read-only.
HT Lnk Speed
Ths tem allows you to set the Hyper-Transport Lnk speed. Settng to [Auto], the system 
wll detect the HT lnk speed automatcally.
Adjusted HT Lnk Frequency
It shows the adjusted HT Lnk frequency. Read-only.
DRAM  Voltage/  NB  Voltage/  CPU  Voltage/  CPU-NB  Voltage/  CPU  PLL  Voltage/ 
SB Voltage/ HT Lnk Voltage/ DDR Vref Voltage/ CPU DDR-PHY Voltage/ NB PCI-E 
Voltage/ DDR VTT Voltage
These tems are used to adjust the voltage of CPU, Memory and chpset.
Overclockng proles
Press <Enter> to enter the sub-menu.
Overclockng Prole 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu. In the sub-menu, these tems are used to save 
the current settngs, and you can to load the settngs from the stored prole.
OC Retry Count
When overclockng has faled, settng ths tem as [1, 3] wll allow system to reboot 
1/ 3 tmes wth the same overclocked conguraton. If overclockng has faled every 
tme, the system wll restore the defaults.
CPU Speccatons
Press <Enter> to enter the sub-menu. The submenu shows the nformaton of nstalled
CPU.
•
•
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶