Important
Since you want to create two volumes (Intel Matrix RAID Technology), this default size
(maximum) needs to be reduced. Type in a new size for the rst volume. As an ex-
ample: if you want the rst volume to span the rst half of the two disks, re-type the size
to be half of what is shown by default. The second volume, when created, will automati-
cally span the remainder of two hard drives.
Then the following screen appears for you to conrm if you are sure to create the
RAID volume. Press <Y> to continue.
6.
Then the following screen appears to indicate that the creation is nished.7.
To Next Page
Loading...
