MSI MS-S1311 - PCI;PCIE Configuration; PCI Express Settings

3-8
BIOS Setup MS-S1311
▶PCI/PCIE Conguration
▶Maximum Payload
This setting sets the maximum TLP payload size for the PCI Express devices.
The unit is byte.
▶PCI Latency Timer
This item controls how long each PCI device can hold the bus before another
takes over. When set to higher values, every PCI device can conduct trans-
actions for a longer time and thus improve the effective PCI bandwidth. For
better PCI performance, you should set the item to higher values.
▶PERR# Generation
Set this setting to [Disabled] to suppress the PCI bridge data parity error gen-
eration capability.
▶SERR# Generation
Set this setting to [Disabled] to suppress the PCI bridge system error gener-
ation capability.