4-7
ATI SATA RAID Setup Guide
3. Follow the prompts to resolve the conflict.
Note that some conflict resolutions may result in the drive letter assignment changing;
for example the RAID set may have been drive D: but after the conflict resolution, it
may become drive E:. To maintain the same drive lettering, you may need to swap the
SATA cable connected to the drive, or in the case of a SATA-based removable drive
unit, you may need to change the order of the drives within the chassis.
u Low Level Formatting
The Low Level Format item selection allows you to completely erase the data on a
hard drive. However this is a very drastic process and not typically needed. Format-
ting the drive under Windows is usually sufficient to delete the data.
To Next Page
Loading...
Need help?
General
