6-6
MS-7145 M-ATX Mainboard
Enabling SURROUNDVIEW
TM
Enabling SURROUNDVIEW™
To enable SURROUNDVIEW™, you must first alter your computer’s BIOS settings.
1. Restart your system, and enter CMOS setup. CMOS is part of your system’s
BIOS (Basic Input/Output System). When restarting, press DEL key to enter
Setup. The CMOS Setup screen appears.
2. Use the arrow keys to navigate to Advanced Chipset Features, and
then press Enter. The Advanced Chipset Features screen appears.
3. Use the arrow keys to navigate to Surronnd View and set it to Enabled.
4. Press F10 to Save your changes. When the Save to CMOS and Exit prompt
appears, press Y.
To Next Page
Loading...
