17
Audio Gateway
Overview
The Audio Gateway Application allows a remote Bluetooth device to use this computer’s micro-
phone and speakers as the remote device’s audio input and output devices.
Create an Audio Gateway Connection
Open a connection to the Audio Gateway service that is provided by another Bluetooth device
using one of these techniques:
• Notification area, at the far right of the taskbar, Bluetooth icon
• From My Bluetooth Places
• Using the Bluetooth Setup wizard
Close an Audio Gateway Connection
If the connection was established from the Bluetooth icon in the Notification area, at the far right
of the taskbar; click the Bluetooth icon, select Quick Connect, Audio Gateway and then select
the device that is providing the service (active connections have a checkmark in front of them).
or
No matter how the connection was created, in My Bluetooth Places, right-click the service name
and select Disconnect.
Configure
The Bluetooth Configuration Panel > Client Applications > Audio Gateway > General tab pro-
vides options to configure:
• The application name - to change it, highlight the existing name and enter the new name.
• Secure connection - to enable secure connection, select the option box. To disable secure
connection, clear the option box.
To Next Page
Loading...
