23
• Secure connection - to enable secure connection, select the option box. To disable secure
connection, clear the option box.
Remote Camera Operation
Remote operation of the Bluetooth imaging device, such as the ability to trip a camera’s shutter
or browse the images on a device, may be possible, depending on the functions supported by
the remote device.
There are three prerequisites:
• This computer must be running under the Windows XP operating system.
• The remote imaging device must support the action. See the remote imaging device’s
documentation for information about the remote functions the device supports.
• The remote imaging device must be installed on this computer (see below).
Install an Imaging Device
Note: Only Windows XP can install an imaging device; previous operating systems do not
have native support for this option.
Perform a search for devices and then, from Entire Bluetooth Neighborhood, right-click a
Bluetooth imaging device, and select Add Camera from the shortcut menu.
Windows installs the camera and adds it to the Cameras and Scanners section of My Computer.
Uninstall an Imaging Device
In Entire Bluetooth Neighborhood, right-click an installed Imaging device and then select Delete
Camera from the shortcut menu.
To Next Page
Loading...
