MSI Summit Series - Image Quality Adjustments

17
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
Zoom In Location Center ∙ The center point will zoom in when
this setting is enabled. Users can
select their Location for Zoom In.
∙ Design Assistance and Zoom In can
be enabled at the same time.
∙ PIP/PBP and FreeSync should be set
to OFF while Zoom In is enabled.
∙ Screen Size 1:1 should be set to Auto
while Zoom In is enabled.
Up-Left
Up-Right
Down-Left
Down-
Right
ON
OFF
Screen Size Auto ∙ Users can adjust Screen Size in any
mode, any resolution and any screen
refresh rate.
∙ If 1:1 is selected then PIP or PBP is
enabled, Screen Size should be reset
to Auto.
4:3
16:9
1:1
FreeSync OFF ∙ FreeSync prevents screen tearing.
∙ Enabling FreeSync will affect PIP/
PBP, Screen Size 1:1 and Zoom In.
ON
Image
1st Level Menu 2nd/3rd Level Menu Description
Brightness 0-100 ∙ Default is 70.
Contrast 0-100 ∙ Default is 70.
Sharpness 0-5 ∙ Sharpness improves clarity and
details of images.
∙ Default is 0.
Gray Level 0-20 ∙ Default is 10.
Image
Enhancement
OFF ∙ Image Enhancement enhances
image edges to improve their
acutance.
Weak
Medium
Strong
Strongest