6.6 Turn on the Heater on the spa wired controller, refer to the “Wired Controller Operation” section. Maximum heating temperature is 40°C (104°F).
7.2
7.1.(1) 7.1.(2) 7.1.(3)
®
(a)
®
(c)
®
(b)
7.2 Square Spa Buckle Lock Operation
Lock the Buckle
● Insert the buckle on the Ground Mat into the Spa cover buckle, until you hear a “Click” sound.
Unlock the Buckle
● Pinch both sides of the locked buckle, and press down the round dot in center in the same time. Press down the center button and release the lock.
Lock Unlock
Zipper and Buckle Operation
7.1 Digital Lock Operation
The default password is “000”. Follow the steps below to change the password:
● Push the button (a) in the direction of Fig.7.1.(1) to unlock the digital lock.
● Set your preferred password in 3 digits by turning the number wheel (b), see Fig.7.1.(2).
● Insert back the cable (c). The new password is set.
7.
WIRED CONTROLLER OPERATION
Heater Button
Bubble Button
Up Button
Filter Button
Timer Button
Down Button
Celsius/Fahrenheit
Toggle Button
11
UP DOWN
HEATER
BUBBLE
FILTER
TIMER
°C
°F
To Next Page
Loading...
Need help?
General
