What to do if my mspa Super Castello M-114S Hot Tub is leaking?
- AabowersAug 9, 2025
If your MSpa Hot Tub is leaking, it is recommended to contact the MSpa Service Center for assistance.
What to do if my mspa Super Castello M-114S Hot Tub is leaking?
If your MSpa Hot Tub is leaking, it is recommended to contact the MSpa Service Center for assistance.
What to do if the bubble air blower does not work on my MSpa Hot Tub?
If the bubble air blower on your MSpa Hot Tub does not work, it is recommended to contact the MSpa Service Center.
How to fix no display on the control panel of my mspa Super Castello M-114S?
If there is no display on the control panel of your MSpa Hot Tub, ensure all internal connections are well connected.
Voltage | 220-240V |
---|---|
LED Lighting | Yes |
Temperature Range | 20°C |
Heat Increasing Rate | 1.5 - 2°C/Hour |
Frequency | 50Hz |
Ozone System | No |
Critical safety warnings for immediate and severe hazards.
Important safety advice to prevent injury or damage.
Essential guidelines for selecting and preparing the installation site.
Specific considerations for installing the spa indoors or outdoors.
Instructions for unpacking, laying out parts, and preparing the spa liner.
Guide to connecting the signal line and control panel.
Explanation of ON/OFF, Bubble, Water Filter, and Heater buttons.
How to adjust temperature and toggle between Celsius and Fahrenheit.
Importance of sanitizing water and maintaining hygiene for spa occupants.
Instructions for inspecting, cleaning, and replacing the filter cartridge.
Addresses issues like no display, heating problems, and air blower failure.
Solutions for water clarity, leaks, air pressure loss, and abnormal shapes.