To Next PageTo Next PageWhy does the filter pump not work on my mspa U-NE022 Hot Tub?
If the filter pump on your MSpa Hot Tub isn't working, the filter cartridge may be clogged by dirt or other objects. Clean or replace the filter cartridge. If the filter cartridge is not the problem, there may be a filter system failure, and you should contact your local MSpa Service Center.
What does it mean when my MSpa Hot Tub LED reads - - - / 888 / EEP?
If your MSpa Hot Tub LED is reading - - - / 888 / EEP, it could be due to a loose signal wire or a communication failure. In either case, you should contact your local MSpa Service Center.
How to fix no display on the mspa U-NE022 control panel?
If there is no display on your MSpa hot tub's control panel, check the power socket and change or repair it if necessary. Reset the PRCD by following the PRCD Testing section. If the issue persists after resetting the PRCD or pressing the reset button, contact the MSpa Service Center.
What causes ozonator failure in MSpa Hot Tub?
Ozonator failure in your MSpa hot tub can occur if the water level is below the minimum line; add water above the minimum line. If the issue persists, it could be due to damaged internal parts, in which case you should contact the MSpa Service Center. Also, check if the filter pump is working correctly.
Why is my mspa U-NE022 in an abnormal shape?
If your MSpa hot tub is in an abnormal shape, it could be due to extra air pressure caused by strong sunlight. Check the air pressure and release air if necessary. During hot weather, it is advisable to check whether some air should be released to avoid any possible damage to the spa pool.
General| Model | U-NE022 |
|---|---|
| Category | Hot Tub |
| Capacity | 4-6 people |
| Control System | Digital control panel |
| Heater | 1500W |
| Power | 1500W |
| Voltage | 220-240V |
| Frequency | 50Hz |
| Cover | Inflatable cover |
| Type | Inflatable |
| Net Weight | 20 kg |
| Material | PVC |
| Temperature Range | 20-42°C |
| Heat Increasing Rate | 1.5 - 2°C/Hour |
| Filter Pump | 12V |
| Insulation | Thermal insulation |
| Filter | Filter Cartridge |
| Warranty | 12 Month Limited Warranty |
Covers DANGER and WARNING sections, detailing risks of drowning, injury, electric shock, and proper electrical connection.
Emphasizes constant supervision of children and restricting access to prevent drowning and injury.
Discusses risks like hyperthermia, effects of alcohol/drugs, medical conditions, pregnancy, and temperature limits.
Covers safe entry/exit, using alone, exercise, and avoiding freezing conditions.
Explains the mandatory testing of the Portable Residual Current Device (PRCD) before each spa use for safety.
Guides on inflating the spa tub using the bubble button and checking air pressure with the manometer.
Instructions for filling the spa with water to the correct level and initiating the heating process.
How to turn on/off the heater, adjust temperature, and understand heating indicators and slow heating factors.
Lists error codes displayed on the LED, their causes, and recommended solutions.
Addresses issues like no display, leaks, heating problems, air loss, water clarity, and pump failures with causes and fixes.
