MTF DM2 600i - Installing the Charging Station

69

INSTALLINGTHECHARGINGSTATION

Findalocationwithaccesstopower,ensuringthe
mowercanleavethechargingstationinananti‐
clockwisedirection.Don“tpegtheplatedownyet.
Thelocationofthechargingstationshouldbeflat
andsecure,withoutriskofmovement,ifplaced
nextto
aborderedgethatisunstableitcanslump
andcausethestationtobeuneven,thiswillcause
problemsforthemowerwhenreturningto
charge.


WARNING:Trailingwiresareatriphazard.Takecarewhenchoosingyourlocation.




Theboundarywiregoesintothe
front(1)ofthechargingstation
andcomesoutattheback(2).
Pushtheboundarywireintothe
tubeatthefront(1)ofthe
chargingstation.
Itwillemergeattherearofthe
unit(2).