What to do if MTF DM2 600i Lawn Mower loop signal lost?
If your MTF Lawn Mower loses the loop signal, it's likely that the power supply or the wire isn't properly connected to the station, or the wire is broken. First, check that the power supply, station, and wire are all correctly connected. If everything seems connected, inspect the wire for any breaks and repair them using a wire splicer.
What to do if MTF DM2 600i Lawn Mower shows motor fault?
If your MTF Lawn Mower displays a motor fault, it means either the blade motor or the drive motor is stuck, or the motor current is too high. You should: 1. Clear any grass or soil from the cutting components and driving wheels. 2. If the grass is high and thick, use a conventional lawn mower to cut it down before using the robotic mower.
How to bring MTF DM2 600i inside the perimeter?
If the MTF Lawn Mower is outside the designated perimeter, place it back inside the perimeter.
Why MTF Lawn Mower wheel spinning faults?
If your MTF Lawn Mower is experiencing wheel spinning faults, it's likely due to uneven and/or wet ground. To resolve this: * Add soil to level the ground. * Ensure the lawn has good drainage before mowing. * Avoid mowing during heavy rain or when the lawn is waterlogged.
What to do if MTF DM2 600i attempts to be outside the perimeter?
If your MTF Lawn Mower attempts to go outside the perimeter, the boundary wires are likely connected to the wrong connectors. Try swapping the wires around at the charging station. Connect the wire that's currently in the red connector to the black connector, and vice versa.
What to do if MTF DM2 600i lifted?
If your MTF Lawn Mower is lifted off the ground, move it to a flat area of the lawn.
What to do if MTF DM2 600i tilted?
If your MTF Lawn Mower is tilted too much, move it to a flat part of the lawn.
What to do if MTF Lawn Mower overturned?
If the MTF Lawn Mower is overturned, return it to its normal upright position.
What to do if MTF Lawn Mower trapped?
If your MTF Lawn Mower is trapped by obstacles, remove the obstacles.
What to do if MTF Lawn Mower shows high temp?
If the MTF Lawn Mower indicates a high temperature, it means the battery temperature is too high. Simply wait for the temperature to decrease.
Explains symbols used on the robotic lawnmower for safety and operation.
General| Brand | MTF |
|---|---|
| Model | DM2 600i |
| Category | Lawn Mower |
| Language | English |
To Next Page