MTF DM2 600i - Laying the Boundary Wire

73

LAYINGTHEBOUNDARYWIRE

Keepthewirestraightforatleastthefirst2m.This
istoallowthemowertoreturntothecharging
standwithease.
Placethepegsatintervalsofabout1monstraight
andevenground,30cmto50cmonbendsand
corners.
Unevengroundandobstacleswillrequire
morepegs.


Theperimeterwiremustbekepttight.Ifitisloose
itmaywellendupbeingcutbythemowerasit
passesoverit.
Theperimeterwiremustbekepttight.Ifitislooseit
maywellend
upbeingcutbythemowerasitpasses
overit.
