2. Open threaded vent plug (5) of the filter to be
drained.
3. Unlock drain valve (6) by pressing toggle and
open it.
4. Drain water and contamination from the filter
until pure fuel emerges.
5. Close drain valve (6).
6. Remove screws securing the cover and take
off cover (2).
7. Fill filter housing with clean fuel.
8. Place new seal in cover (2).
9. Fit cover with seal and secure it with screws.
Note: Only in the case of double fuel prefilter:
10. Cut in the cut-out filter again.
11. When fuel emerges from system, close
threaded vent plug (5).
MS15018/03E 2016-02 | Fuel Filter | 105
TIM-ID: 0000004929 - 008
To Next Page
Loading...
