MTU 12V2000M84 - Interface Module EIM Plug Connections Check

8.21.5 Interface module EIM plug connections – Check
Preconditions
☑ Engine is stopped and starting disabled.
Checking EIM plug connections
1. Check both Tyco plugs (62-pole) (2) on EIM
for firm seating. Ensure that clips (3) are en-
gaged.
2. Check screws (1) of cable clamps on EIM for
firm seating. Ensure that cable clamps are
not faulty.
MS150063/03E 2016-02 | Accessories for (Electronic) Engine Governor / Control System | 131
TIM-ID: 0000017034 - 004