2. Open threaded vent plug (1) of contaminat-
ed filter.
3. Unlock drain valve (5) by pressing toggle
and open it.
4. Drain water and dirt from filter.
5. Close drain valve (5).
6. Remove screws securing cover (2) and take
off cover.
7. Remove spring cartridge (3) and filter ele-
ment (4).
8. Insert new filter element (4) and spring car-
tridge (3).
9. Fill filter housing with clean fuel.
10. Place new seal in cover.
11. Fit cover with gasket and secure it with
screws (2).
12. Cut in the cut-out filter again.
13. Close threaded vent plug (1) when fuel
emerges.
14. Set adjustable pointer of differential pres-
sure gage (→ Page 85).
MS150119/00E 2014-08 | Task Description | 91
TIM-ID: 0000045554 - 002
To Next Page