7.14.2 Engine oil – Change
Preconditions
☑Engine is stopped and starting disabled.
☑Engine is at operating temperature.
☑MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Engine oil
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Version with extraction equipment: Engine oil extraction
1. Position a suitable container to drain the engine oil into.
2. Extract all engine oil from oil pan using the extraction equipment.
Filling with new engine oil
1. Determine amount of engine oil required
for oil change (→ Page 40).
2. Open cap (1) on filler neck.
3. Pour engine oil in at filler neck up to “max.”
mark at oil dipstick.
4. Close cap (1) on filler neck.
5. Check engine oil level (→ Page 97).
6. After oil change, bar engine with starting
system.
98 | Task Description | MS150119/00E 2014-08
TIM-ID: 0000055250 - 001
To Next Page