8. Use torque wrench to tighten screw (3) for hold-down clamp (2) to specified tightening torque.
Name Size Type Lubricant Value/Standard
Screw M8 Tightening torque (Engine oil) 40 Nm +4 Nm
9. Using a torque wrench, tighten union nut (2) on pressure pipe neck (3) to specified torque.
Name Size Type Lubricant Value/Standard
Union nut Tightening torque 45 Nm +5 Nm
Installing fuel line
1. Apply engine oil to thread and mating face of union nut of fuel line (1).
Note: Position fuel line, ensuring that it is free of tension.
2. Position fuel line (1) so that the end with the marked union faces the rail and the end with the unmarked
union nut faces the pressure pipe neck (2) and tighten it hand-tight.
3. Tighten union nut of fuel line (1) on rail to specified tightening torque using a torque wrench.
Name Size Type Lubricant Value/Standard
Union nut Tightening torque (Engine oil) 45 Nm +5 Nm
MS150094/02E 2015-05 | Task Description | 85
TIM-ID: 0000023980 - 004
To Next Page
Loading...
