EasyManua.ls Logo

MTU 16V2000S96 - 4 Maintenance; Maintenance Task Reference Table [QL1]

MTU 16V2000S96
163 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Maintenance
4.1 Maintenance task reference table [QL1]
The maintenance tasks and intervals for this product are defined in the Maintenance Schedule. The Mainte-
nance Schedule is a stand-alone publication.
The task numbers in this table provide reference to the maintenance tasks specified in the Maintenance
Schedule.
Task Maintenance tasks
W0500 Check engine oil level. (→ Page 102)
W0501 Visually inspect engine for leaks and general condition. (→ Page 37)
W0502 Check intercooler drain(s). (→ Page 37)
W0503 Check service indicator of air filter. (→ Page 37)
W0505 Check relief bores of coolant pump(s). (→ Page 37)
W0506 Check engine for abnormal running noises, exhaust color and
vibrations.
(→ Page 37)
W0507 Drain water and contaminants from fuel prefilter. (→ Page 37)
W0508 Check reading on differential pressure gauge of fuel prefilter. (→ Page 37)
W1001 Replace fuel filter or fuel filter element (→ Page 91)
W1003 Check belt condition and tension, replace if necessary (→ Page 127)
W1005 Replace air filter. (→ Page 98)
W1006 Replace fuel injectors. (→ Page 81)
W1008 Replace engine oil filter when changing engine oil, or when the
interval (years) is reached, at the latest.
(→ Page 104)
W1009 Check layer thickness of the oil residue, clean out and replace
filter sleeve, at each oil change, at the latest.
(→ Page 105)
W1178 Replace pressure pipe neck in cylinder head. (→ Page 87)
W1207 Check valve clearance, adjust if necessary. ATTENTION! First
adjustment after 1,000 operating hours on a new engine and
after 1,000 operating hours following each overhaul of the cyl-
inder heads.
(→ Page 77)
W1244 Check function of rod electrode. -
W1245 Check alarm function of differential pressure gauge. -
W1246 Check pump capacity. -
W1523 Check operation of flaps and actuators. (→ Page 101)
W1525 Replace sensor. (→ Page 142)
W1526 Replace sensor. (→ Page 140)
W1547 Replace oil mist separator. (→ Page 76)
W1636 Reset drift compensation (CDC) parameters and enter injector
codes (IIG).
(→ Page 146)
Table 1: Maintenance task reference table [QL1]
42 | Maintenance | MS150094/02E 2015-05
TIM-ID: 0000022887 - 004

Table of Contents

Related product manuals