6.17.5 Humidity sensor – Replacement
Preconditions
☑ Engine is stopped and starting disabled.
☑ Preparatory steps are completed.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Torque wrench, 8–40 Nm
F30043446 1
Ratchet adapter
F30027340 1
Assembly compound (Kluthe Hakuform 30–15)
X00067260
Humidity sensor
(→ Spare Parts Catalog) 1
NOTICE
Contamination of components.
Damage to component!
• Observe manufacturer's instructions.
• Check components for special cleanliness.
Removing humidity sensor
1. Observe the following general information:
• Layout and position of sensor
(→ Page 139).
2. Unplug and remove male connector.
3. Remove screws (1).
4. Remove sensor (2).
144 | Task Description | MS150094/02E 2015-05
TIM-ID: 0000025206 - 006
To Next Page
Loading...
