MTU 16V2000S96 - Accessories for (Electronic) Engine Governor; Control System

6.18 Accessories for (Electronic) Engine Governor / Control System
6.18.1 Resetting CDC parameter and entering IIG with DiaSys®
Preconditions
☑ Engine is stopped and starting disabled.
Note: If the parameters for the drift correction (CDC) are not reset, the emission certification becomes invalid.
Resetting parameters for drift correction (CDC) with DiaSys®
1. Use DiaSys® to reset the CDC parameters (→ Dialog system DiaSys® E531920/..).
2. If no DiaSys® is available, contact Service.
Entering the codes for the injectors (IIG) with DiaSys®
1. Use DiaSys® to enter the IIG (→ Dialog system DiaSys® E531920/..).
2. If no DiaSys® is available, contact Service.
146 | Task Description | MS150094/02E 2015-05
TIM-ID: 0000045613 - 001