EasyManua.ls Logo

MTU 16V2000S96 - Page 56

MTU 16V2000S96
163 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
230 – SD Crankshaft Speed
Yellow alarm; warning
Cause Corrective action
Crankshaft sensor faulty. 1. Check sensor B13 and wiring, replace as necessary (→ Page 138).
2. Fault is rectified when engine is restarted, contact Service if this is
not the case.
231 – SD Camshaft Speed
Yellow alarm; warning
Cause Corrective action
Camshaft sensor faulty. 1. Check sensor B1 and wiring, replace as necessary (→ Page 138).
2. Fault is rectified when engine is restarted, contact Service if this is
not the case.
239 – SD P-Diff Fuel
Yellow alarm; warning
Cause Corrective action
Fuel pressure sensors faulty. u Check sensor B34.2, sensor 34.3 and wiring, replace as necessary
(→ Page 138).
240 – SD P-Fuel
Yellow alarm; warning
Cause Corrective action
Fuel pressure sensor before
intermediate filter faulty.
u Check sensor B34.3 and wiring, replace as necessary
(→ Page 138).
245 – SD ECU Supply Voltage
Yellow alarm; warning
Cause Corrective action
Internal ECU fault. u Replace Engine Control Unit.
266 – SD Speed Setting
Yellow alarm; warning
Cause Corrective action
Analog speed setting faulty. 1. Check speed setting transmitter and wiring, replace as necessary
(→ Page 138).
2. Fault is rectified when engine is restarted.
269 – SD Loadp. Analog fil.
Yellow alarm; warning
Cause Corrective action
The filtered analog signal from the
load pulse is not present.
1. Check wiring, replace as necessary.
2. Fault is rectified when engine is restarted.
56 | Troubleshooting | MS150094/02E 2015-05
TIM-ID: 0000060724 - 001

Table of Contents

Related product manuals