8.18 Battery-Charging Generator
8.18.1 Battery-charging generator drive – Drive belt replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Drive belt
(→ Spare Parts Catalog)
Preparatory steps
1. Remove safety equipment (if fitted).
2. Remove screws of protective cover (engine free end).
3. Remove protective cover.
Replacing drive belt
1. Counterhold adjusting lever at square (2).
2. Rotate adjusting lever until drive belt is re-
leased.
3. Secure adjusting lever with screwdriver (1).
4. Remove drive belt.
5. Check cleanness of belt pulleys.
6. Fit new drive belt.
7. Release securing element at adjusting lever.
8. Mount adjusting lever with square (2) slowly
on drive belt.
Final steps
1. Install protective cover.
2. Install screws of protective cover.
3. Install safety equipment (if fitted).
4. Check function of safety equipment (if fitted).
124 | Battery-Charging Generator |
MS150060/04E 2016-02
TIM-ID: 0000007424 - 005
To Next Page
Loading...
