Removing transport locking de-
vice - version B
1. On all bearing outer races of the resilient
mount (1) release nuts (3, 4) and unscrew
and remove together with locking screw (2)
(4 x per bearing element).
2. The removed parts (2, 3, 4) of the transport
locking device must be stored carefully for
possible reuse.
Installing transport locking de-
vice - version B
1. Screw in locking screw (2) together with nut
(3) and nut (4) (4 x per bearing element).
2. Place nut (3) in position on resilient mount
(1).
3. Lock locking screw (2) with nut (4).
4. Mark the engine as "Fitted with transporta-
tion locking device".
MS150060/04E 2016-02 | Transport | 19
TIM-ID: 0000066207 - 001
To Next Page
Loading...
