Number of cylinders 8
Cylinder displacement Liters 2.23
Total displacement Liters 17.84
Number of inlet valves per cylinder 2
Number of exhaust valves per cylinder 2
Raw water circuit (open circuit)
Number of cylinders 8
Raw water pump: Inlet pressure, min. L bar -0.4
Raw water pump: inlet pressure, max. L bar +0.5
Pressure loss in engine-external raw water system, max. L bar 1.2
Lube oil system
Number of cylinders 8
Lube oil operating temperature before engine, from R °C 74
Lube-oil operating temperature before engine, to R °C 83
Lube oil operating pressure before engine, from R bar 9.0
Lube oil operating pressure before engine, to R bar 10.0
Lube oil operating pressure (low idle) (meas. point: before engine) R bar 2.5
Fuel system
Number of cylinders 8
Fuel pressure at engine inlet connection, min. (when engine is starting) L bar -0.3
Fuel pressure at engine inlet connection, min. (during engine operation) L bar -0.3
Fuel pressure at engine inlet connection, max. (when engine is starting) L bar +0.25
Fuel supply flow, max. A liters/min 4.8
General operating data
Number of cylinders 8
Firing speed, from R rpm 100
Firing speed, to R rpm 120
Starter (electric)
Number of cylinders 8
Rated starter voltage (standard design) R V= 24
Inclinations - standard oil system (reference: waterline)
Number of cylinders 8
Longitudinal inclination, continuous max. driving end down (option: max. oper-
ating inclinations)
L Degrees
(°)
15
Longitudinal inclination, temporary max. driving end down (option: max. oper-
ating inclinations)
L Degrees
(°)
20
MS150060/04E 2016-02 | Technical Data | 35
TIM-ID: 0000026943 - 003
To Next Page
Loading...
