What does '112309 – HI T-Exhaust A9' mean on my MTU MS150033/05E and how can I fix it?
If your MTU Engine displays the error '112309 – HI T-Exhaust A9', it means that the exhaust temperature of this cylinder is too high as compared with the average value. To fix this, you can: * Check emission values. * Check ignition timing. * Check valve drive (exhaust valves do not close).
What does it mean if my MTU MS150033/05E Engine says 'Lube Oil Max'?
If your MTU Engine displays a 'Lube Oil Max' message, it signifies that the maximum engine oil level has been detected. You should check the engine oil level and the replenishment system.
What should I do if my MTU MS150033/05E Engine indicates 'SS Coolant too Low'?
If your MTU Engine displays 'SS Coolant too Low', it means there's a lack of coolant in the cooling system, and the feedback signal from the level sensor is missing. Check the sensor and its cabling, replacing them if necessary. Also, verify the coolant level and try to pinpoint any leakage.
What to do if MTU MS150033/05E shows 'Communication Lost ECU'?
If your MTU Engine shows a 'Communication Lost ECU' error, it means there is no communication with the ECU CAN. To resolve this, check the supply voltage and the connecting line.
What does error '112310 – HI T-Exhaust A10' mean on my MTU MS150033/05E Engine?
If your MTU Engine displays the error '112310 – HI T-Exhaust A10', it means that the exhaust temperature of this cylinder is too high as compared with the average value. You should: * Check emission values. * Check ignition timing. * Check valve drive (exhaust valves do not close).
What does error '112402 – LO T-Exhaust A2' mean on my MTU MS150033/05E Engine?
If your MTU Engine displays the error '112402 – LO T-Exhaust A2', it means that the exhaust temperature of this cylinder is too low as compared with the average value. You should: * Check spark plug. * Check emission values. * Check ignition timing. * Check valve drive.
What does '112301 – HI T-Exhaust A1' mean on my MTU Engine?
If your MTU Engine shows the error code '112301 – HI T-Exhaust A1', it means that the exhaust temperature of this cylinder is too high as compared with the average value. You should: * Check emission values. * Check ignition timing. * Check valve drive (exhaust valves do not close).
What does '112302 – HI T-Exhaust A2' mean on my MTU MS150033/05E?
If your MTU Engine displays error '112302 – HI T-Exhaust A2', it indicates that the exhaust temperature of this cylinder is too high as compared with the average value. To solve this, you can: * Check emission values. * Check ignition timing. * Check valve drive (exhaust valves do not close).
What does 'HI Oil Refill' mean on my MTU MS150033/05E?
If your MTU Engine shows 'HI Oil Refill', it indicates that too many pulses have been received for lube oil replenishment. You should check the engine oil level and the oil supply.
How to troubleshoot 'AL Preheating Error' on MTU MS150033/05E Engine?
If your MTU Engine displays 'AL Preheating Error', it means preheating fault, coolant differential pressure over engine is below the specified value. To troubleshoot this, check differential coolant pressure and the operation of coolant pumps.
Critical safety checks and procedures before and during engine startup and operation.
Safety precautions to be taken before, during, and after maintenance and repair tasks.
Measures for fire prevention, environmental protection, and safe handling of fluids.
Step-by-step procedure for preparing an engine after a prolonged period of inactivity.
Detailed explanation of the automated sequences for engine start, stop, and emergency stop.
Preconditions and instructions for safely starting the engine according to specified sequences.
Routine checks to be performed during engine operation to ensure proper functioning and safety.
Correct procedure for shutting down the engine, including pre-shutdown idling steps.
Instructions for activating the emergency stop function and subsequent safety measures.
Detailed list and corrective actions for various fault messages generated by the SAM unit.
Troubleshooting guidance for fault messages originating from the engine governor (ECU).
Critical safety checks and procedures before and during engine startup and operation.
Safety precautions to be taken before, during, and after maintenance and repair tasks.
Measures for fire prevention, environmental protection, and safe handling of fluids.
Step-by-step procedure for preparing an engine after a prolonged period of inactivity.
Detailed explanation of the automated sequences for engine start, stop, and emergency stop.
Preconditions and instructions for safely starting the engine according to specified sequences.
Routine checks to be performed during engine operation to ensure proper functioning and safety.
Correct procedure for shutting down the engine, including pre-shutdown idling steps.
Instructions for activating the emergency stop function and subsequent safety measures.
Detailed list and corrective actions for various fault messages generated by the SAM unit.
Troubleshooting guidance for fault messages originating from the engine governor (ECU).
To Next Page
General