What does '181 – AL CAN2 Node Lost' mean for my MTU Engine?
The error '181 – AL CAN2 Node Lost' on your MTU Engine indicates that a bus node (SAM or EMU) has been lost on CAN bus 2. Check the operation of nodes and cabling. Remember that Busses (CAN bus 1 and CAN bus 2) are redundant.
What does '180 – AL CAN1 Node Lost' mean for my MTU MS150033/05E?
The error '180 – AL CAN1 Node Lost' on your MTU Engine indicates that a bus node (SAM or EMU) has been lost on CAN bus 1. Check the operation of nodes and cabling. Remember that Busses (CAN bus 1 and CAN bus 2) are redundant.
What to do if my MTU MS150033/05E Engine shows 'Lube Oil Min'?
If your MTU Engine indicates a 'Lube Oil Min' error, it means the minimum engine oil level has been detected. You should check the engine oil level and the replenishment system.
What to do if my MTU MS150033/05E Engine displays 'SS Release Circuit Breaker'?
If your MTU Engine displays 'SS Release Circuit Breaker', it means a circuit breaker release has been detected. You should check the circuit breakers.
How to troubleshoot 'AL Preheating Error' on MTU MS150033/05E Engine?
If your MTU Engine displays 'AL Preheating Error', it means preheating fault, coolant differential pressure over engine is below the specified value. To troubleshoot this, check differential coolant pressure and the operation of coolant pumps.
What to do if my MTU MS150033/05E Engine shows 'Comm. Lost Mixer (TecJet)'?
If your MTU Engine displays 'Comm. Lost Mixer (TecJet)', it means there is no communication with the mixer (TecJet) CAN. Check the supply voltage and the connecting line.
What does it mean if my MTU MS150033/05E says 'Comm. Lost Ignition'?
If your MTU Engine shows 'Comm. Lost Ignition', it means there is no communication with the ignition CAN. You should check the supply voltage and the connecting line.
What to do if MTU Engine displays 'Comm. Lost Knock Module'?
If your MTU Engine displays 'Comm. Lost Knock Module', it indicates no communication with the knocking module CAN. You should check the supply voltage and the connecting line.
What should I do if my MTU MS150033/05E Engine shows 'Communication Lost EMU'?
If your MTU Engine displays a 'Communication Lost EMU' error, it means there is no communication with the EMU CAN. To fix this, check the supply voltage and the connecting line.
Why does my MTU MS150033/05E show 'SS Gas Pressure MIN'?
The 'SS Gas Pressure MIN' error on your MTU Engine indicates that the minimum gas pressure has been applied. Therefore, check the initial gas pressure and the gas line, and also check the cabling.
Critical safety checks and procedures before and during engine startup and operation.
Safety precautions to be taken before, during, and after maintenance and repair tasks.
Measures for fire prevention, environmental protection, and safe handling of fluids.
Step-by-step procedure for preparing an engine after a prolonged period of inactivity.
Detailed explanation of the automated sequences for engine start, stop, and emergency stop.
Preconditions and instructions for safely starting the engine according to specified sequences.
Routine checks to be performed during engine operation to ensure proper functioning and safety.
Correct procedure for shutting down the engine, including pre-shutdown idling steps.
Instructions for activating the emergency stop function and subsequent safety measures.
Detailed list and corrective actions for various fault messages generated by the SAM unit.
Troubleshooting guidance for fault messages originating from the engine governor (ECU).
To Next Page
General