What to do if MTU MS150033/05E shows 'Communication Lost ECU'?
If your MTU Engine shows a 'Communication Lost ECU' error, it means there is no communication with the ECU CAN. To resolve this, check the supply voltage and the connecting line.
What should I do if my MTU MS150033/05E Engine indicates 'SS Coolant too Low'?
If your MTU Engine displays 'SS Coolant too Low', it means there's a lack of coolant in the cooling system, and the feedback signal from the level sensor is missing. Check the sensor and its cabling, replacing them if necessary. Also, verify the coolant level and try to pinpoint any leakage.
What does it mean if my MTU MS150033/05E Engine says 'Lube Oil Max'?
If your MTU Engine displays a 'Lube Oil Max' message, it signifies that the maximum engine oil level has been detected. You should check the engine oil level and the replenishment system.
Critical safety checks and procedures before and during engine startup and operation.
Safety precautions to be taken before, during, and after maintenance and repair tasks.
Measures for fire prevention, environmental protection, and safe handling of fluids.
Step-by-step procedure for preparing an engine after a prolonged period of inactivity.
Detailed explanation of the automated sequences for engine start, stop, and emergency stop.
Preconditions and instructions for safely starting the engine according to specified sequences.
Routine checks to be performed during engine operation to ensure proper functioning and safety.
Correct procedure for shutting down the engine, including pre-shutdown idling steps.
Instructions for activating the emergency stop function and subsequent safety measures.
Detailed list and corrective actions for various fault messages generated by the SAM unit.
Troubleshooting guidance for fault messages originating from the engine governor (ECU).
To Next Page
General