Page - 10 - Copyright Müller-Elektronik GmbH & Co. KG, Installation and operating instructions SPRAYDOS (07.2016)
Übersicht
[1] SPRAYDOS computer
[2] Cap profile rail for mounting the SPRAYDOS
[3] Wing screw to secure the computer
[4] Bracket S for mounting the cap profile rail
[5] Basic console, to be mounted on the tractor cabin. For fitting the bracket with cap profile rail and battery connection.
[6] Battery connecting cable for the SPRAYDOS voltage supply, connection to a 12-volt battery.
[7] Machine signal distributor
Combines the sensor and actuator connections on the machine.
[8] Sensor X (wheel) records distance impulses on the trailed field sprayer.
[9] Sensor X (cardan shaft / wheel)
records speed, impulses on the cardan shaft or front tractor wheel.
[10] Plug for tractor signal socket
records the signals from the installed sensors on the tractor.
[11] Hydraulic signal distributor
Combines the hydraulic connections on the machine (for SPRAYDOS – long version).
To Next Page
Loading...
Need help?
General
