Description of Refrigerant Components
Scroll Compressor: All Multiaqua chillers feature scroll
compressors. Scroll technology ensures reliable, high
performance at a low sound level over a wide range of
operating conditions.
Caution: The top half of the scroll
compressor operates at a temperature high
enough to cause burns and serious injury.
Brazed Plate Heat Exchanger: The heat exchanger (or
evaporator) is of a brazed copper and stainless steel design.
Refrigerant and liquid solution are channeled through the
narrow openings between the plates and flow in opposite
directions. The counter flow design and fluid turbulence
ensures maximum heat exchange at minimal pressure drops.
Thermal Expansion Valve: Multiaqua chillers are equipped
with thermal expansion valves. The valves feature a liquid
charged sensing bulb for consistent superheat at various load
conditions.
Condenser Coil: The air-cooled condenser coil is made of
copper tube with an aluminum fin construction. The coil is
protected by a painted metal condenser grille.
To Next Page
Loading...
