multicomp pro MP730026 - Testing for Continuity; Testing Diodes; Measuring Capacitance

User Manual
11
Warning: Before starting any measurement, observe the rotary switch
position of the multimeter, and then connect the test leads to the
correct terminals.
Caution: To avoid damaging the multimeter, do not exceed the rated input limit.
Rotary switch
position
Input terminals
Overload protection
( )
750 VAC/1000 VDC
250 VAC/300 VDC
400 mA/250 V, resettable
fuse
20 A/250 V, fast-acting fuse