Why is the exhaust from my MULTIQUIP MTX60HD white?
If the exhaust color of your MULTIQUIP Vibratory rammers & tampers is continuously white, the lubricating oil might be the wrong viscosity, so replace it with the correct viscosity. The rings might also be worn, requiring replacement.
Why does my MULTIQUIP MTX60HD burn so much fuel?
If your MULTIQUIP Vibratory rammers & tampers burns too much fuel, there might be an over-accumulation of exhaust products. Check and clean the valves, and check the muffler, replacing it if necessary. The spark plug might also be wrong, so replace it with the manufacturer's suggested type.
Why does the rotational speed of my MULTIQUIP Vibratory rammers & tampers fluctuate?
If the rotational speed of your MULTIQUIP Vibratory rammers & tampers fluctuates, the governor might be adjusted incorrectly, so adjust it. The governor spring could be defective, so replace it. There might be restricted fuel flow, so check the entire fuel system for leaks or clogs.
What to do if MULTIQUIP Vibratory rammers & tampers recoil starter malfunctions?
If your MULTIQUIP Vibratory rammers & tampers recoil starter malfunctions, the recoil mechanism might be clogged with dust and dirt, so clean the recoil assembly with soap and water. Alternatively, the spiral spring might be loose, requiring replacement.
Why is my MULTIQUIP Vibratory rammers & tampers starter malfunctioning?
If your MULTIQUIP Vibratory rammers & tampers starter malfunctions, there might be loose or damaged wiring. Ensure tight, clean connections on the battery and starter. The battery might be insufficiently charged, so recharge or replace it. The starter might be damaged or internally shorted, so replace the starter.
Explains the meaning of safety messages (DANGER, WARNING, CAUTION, NOTICE) and associated hazard symbols.
Covers general operating safety, personal protective equipment, and specific rammer handling guidelines.
Details engine exhaust hazards, safe fuel handling, and fire prevention measures.
Outlines safe practices for moving the equipment and proper disposal of hazardous waste.
Lists physical dimensions, capacities, power output, and operating parameters for the rammer and engine.
Provides measured sound power/pressure levels and hand-arm vibration data according to specific directives.
Guides on checking oil levels and grades for the rammer's oil bath and engine lubrication.
Covers pre-operation checks like fasteners, cleaning, and decal condition.
Step-by-step instructions for starting the rammer engine, including choke and purge bulb usage.
Details engaging tamping action, operating at speed, and safe engine shutdown procedures.
Outlines routine checks and cleaning based on operating hours and time intervals.
Procedures for preparing the equipment for extended periods of non-use, including draining fuel and protecting components.
Diagnoses and solutions for common engine issues such as no spark, fuel problems, or overheating.
Addresses issues like erratic jumping or lack of rammer action, and potential causes like incorrect speed or clutch slip.
Illustrated breakdown of the crankcase and engine assembly parts with numbered references.
Detailed part numbers and descriptions for the crankcase and engine assembly components.
Visual representation of the rammer's foot assembly parts with numbered labels.
Catalog of specific part numbers and quantities for the foot assembly.
Illustrated breakdown of the fuel tank and handle assembly components with numbered references.
List of specific part numbers and quantities for the fuel tank and handle assembly.
Illustrated parts breakdown for the engine's cylinder barrel and associated components.
Exploded view and parts list for the engine's crankcase cover.
Diagram and part numbers for the engine's crankshaft and bearing.
Illustrated parts for the engine's piston, rings, pin, and connecting rod.
Breakdown of the engine's camshaft, valves, springs, and related parts.
Components of the engine's recoil starter mechanism, including rope and knob.
Diagram and parts list for the engine's cooling fan cover.
Illustrated parts for the engine's carburetor, noting serial number variations.
Diagram and part list for the engine's air cleaner system.
Illustrated parts and breakdown of the engine's muffler and protector.
Components of the engine's flywheel, ignition coil, and starter pulley.
Illustrated parts for the engine's control mechanisms, such as the governor assembly.
Identification of various labels and decals applied to the engine.
General| Brand | MULTIQUIP |
|---|---|
| Model | MTX60HD |
| Category | Vibratory rammers & tampers |
| Language | English |
To Next Page