Multitech MultiModem II MT5600BA-V92 - Page 36

Chapter 6 – Callback Security
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide 36
Store Callback Number
Command:
#CBNy=[-]x
Values:
y = 01–30
x = dialing string
Default:
None
Description:
Stores the callback dialing string x in memory location y. The dialing string can include
the digits 0 through 9 and any of the following characters: #, *, comma (,), semicolon
(;), W, A, B, C, and D. Up to 30 characters can be used.
Example:
AT#CBN01=9,16127853000. If the optional - character precedes the dialing string, and
the caller appends the same character to the password, the caller is connected
immediately, and the hangup and callback are skipped.
Store Callback Password
Command:
#CBPy=x
Values:
y = 01–30
x = password (6–10 characters)
Defaults:
None
Description:
Stores callback security password x in memory location y. The password must have 6
to 10 characters.
Note: A direct connect password may not end with a hyphen (-).