RPR 550IS Series
TM1188 Issue 1Page 1 - 8
d) Audible Alert, Full Volume (typical): 80dB SPL @ 30cm
e) Audible Alert* (escalating option): Stage 1: 4 seconds of LED and
vibrate.
Stage 2: 4 seconds of low
volume Mk7 beep
patterns (70dB to 75dB
SPL typical) at 2.7kHz,
with LED and vibrate.
Stage 3: 8, 16, 32 seconds or
continuous full volume
Mk7 beep patterns
(80dB SPL typical at
2.7kHz) with LED and
vibrate.
* If vibrate fitted: two seconds on/two seconds off for the alert duration.
f) Audible Alert - Out-of-Range and Low Battery Buzz, 2.7kHz tone modulated with
512Hz tone.
Memory
12. The memory specifications are as follows:
a) Maximum number of calls stored: 5
b) Maximum message length: 60 characters (limited by encoder)
c) Total message storage: 256 characters
Beep Code Alpha
13. Beep code alpha messages are alphanumeric messages which are triggered by beep
codes. There can be up to four messages, each with a maximum of 14 characters.
To Next Page
Loading...
