Munters TRIO User Manual

© Munters AB, 2020 105
15 Timers
Timers provide an additional method of controlling relay devices, namely setting a
timetable in which the device can operate. In addition to the timetable, Trio enables setting
up time cycles and temperature ranges in which a device can operate.
Trio supports up to five timers.
 Define at least one relay as a timer in Devices and Sensors.
1. In Control > Timers, click edit, and define a timer as Active.
2. Define for each timer:
o
Active House Mode: Define in which mode each timer can operate. Multiple
modes can be selected.
o
Time: Timers can run 24 hours a day or in user-defined time frames. Define
up to four time frames for each timer.
o
Cycle: If enabled, define the cycle times. The timer operates using the cycle
defined here. Range: 0 – 999 seconds (optional).
o
Temperature: If enabled, define the temperature range in which the timers
operate. Range [-40° - +90°] (optional).
3. As an option, timers can be mapped to an outside temperature sensor. Go to
System > Temperature Definition.

Munters TRIO Specifications

General

Brand	Munters
Model	TRIO
Category	Controller
Language	English