Munters TRIO - Page 59

© Munters AB, 2020 59
7.3.2 D
EFINING THE
S
TIR
F
AN
 Define one relay or port as a stir fan (refer to Mapping Devices, page 50).
•
On Off Stir Fan
•
0 – 10 Volt Stir Fan
7.3.2.1 On Off Stir Fan
•
Define:
o
KWh: This field displays the amount of kilowatts used. Read-only.
o
Operation: Define the relay mode.
•
The status shows if the stir fan is currently operating.