Munters WF54 - Shutter Installation

© Munters Corporation , March 2017
8
QM1224r3
Figure 4B Figure 4C
¼" x 1½" Lag
screws [A]
Installation InstructionsChapter 2
Figure 5A
Figure 5B
Bottom
Shutter Clip
Step 1
Insert shutter into fan by sliding the bottom flange of shutter into bottom shutter clips and pressing shutter
inward, See Figure 5A. Fasten shutter in place by rotating the side and top shutter clips over the shutter
flanges, See Figure 5B.
Top
Shutter
Clip
Side Shutter Clip
2.2 Shutter Installation