Muratec MFX-C2280 Feature Overview

Muratec MFX-C3680 Series
Fax Features
17
Set Sender Fax Number for Line 2
This setting restricts line 2 from receiving faxes. By selecting “TX Only”, this line
is strictly used to send faxes, not receive them.
PRE-REQUISITES
• TWO FK-511 Fax Kits must be installed and one-touch fax destinations
should be programmed.
APPLICATION
This office is shared by two doctors.
Each doctor has been designated their
own fax number. In order for recipients
to clearly understand the originator of
the fax, each fax line has its own fax
number — the number that will be stamped on the fax reception. In this case,
we are specifically programming the fax number for Line 2.
1. Touch Utility.
2. Touch Administrator Settings.
3. Enter Password (Default is 1234567812345678).
4. Touch OK.
5. Touch Fax Settings.
6. Touch Multi Line Settings.
7. Touch Sender Fax No.
8. Touch Enter Fax Number.
9. Touch OK.
10. Press Close 4x to get to the Main Screen.
Ifnot on the home screen,
touch the Menu key on
the Control Panel .
Setting Sender Fax Number for Line 2
identifies the “sender” of the transmission.
Inthis case, since there are two fax lines
onone machine, each line has its own fax
number programmed in the device.

Muratec MFX-C2280 Specifications

General

Brand	Muratec
Model	MFX-C2280
Category	Copier
Language	English