Muratec MFX-C2280 Copy Guide

47
bizhub C754 Series/C554 Series/C364 Series/754 Series
Copy job shops
Real Time Preview of Copy Job with Finishing Settings
Business application: Allows the user to preview a copy job with job settings before
printing and add more pages if desired.
NOTE: This will not work for booklet.
You will need a 4 page original document size (8.5" x 11").
If not on the Home screen touch the Menu key on the Control Panel.
Touch the Copy icon.
If already on the Copy screen Press the “Reset” Key before beginning this job shop.
1. Place 2 Originals in the
Dual Scanner or RADF.
2. Touch the Finishing key.
3. Select 2 Position
(for Staple).
4. Touch OK.
The default setting
for 2position stapling
is on the left side.
5. Press the Preview
button on the side
of the control panel.
6. Select the Mode as
Preview On Screen.
7. Select the Icon that
matches the direction
of the originals that are
in the document feeder.
8. Touch Start.

Muratec MFX-C2280 Specifications

General

Brand	Muratec
Model	MFX-C2280
Category	Copier
Language	English