Muratec MFX-C2280 Copy Guide

51
bizhub C754 Series/C554 Series/C364 Series/754 Series
Copy job shops
Copying on Tabs
Pre-requisites
You will need 8.5" x 11" Tabs. The Konica Minolta approved tab dividers are the Avery
Dennison 20406 (long edge-only) tabs.
APPLICATION
Customer creates booklets and/or binders and needs to insert printed tabs to separate
chapters or sections.
If not on the Home screen touch the Menu key on the Control Panel
.
1. Place the index original on the Original Glass or ADF.
2. Touch the Copy icon.
3. Touch Application.
4. Scroll to No. of Originals section.
5. Touch Tab Original.
6. Select ON to Copy
anindex original (Tab).
7. Select 8.5" x 11" as
the Paper Size of the
index original (Tab).
8. Touch OK.
9. Touch Close.
10. Load the tab into the
Bypass Tray (up to 70
sheets can be loaded).
a. With print side facing
down, align the tabs
facing away from
theengine.
b. Slide the lateral glides to fit against the tab paper.

Muratec MFX-C2280 Specifications

General

Brand	Muratec
Model	MFX-C2280
Category	Copier
Language	English