bizhub C754 Series/C554 Series/C364 Series/754 Series
Copy job shops
11
Card Shot Copy Function
WHAT & WHY
The Card Shot function on the bizhub MFP enables a user to separately scan the
front and back of a card, and then copy them on to one sheet. Use this function
to copy the card at 100% (x1.0) or enlarge (Full Size) the image to fit the paper size
selected. Using the Card Shot function provides several benefits including paper
conservation. The Card Shot function keeps each separately scanned side together,
which ultimately reduces the need to keep track of multiple sheets.
When using this feature, you can position the card on the same physical location
when scanning both sides — the MFP recognizes that it is a front and back scan
and positions the image on the paper according to its size.
APPLICATION
Anyone who has been admitted to a hospital or needed to visit the doctor's office
knows that an insurance card always needs to be produced. Office personnel take
the insurance card and make a copy, or two. The Card Shot function allows the office
personnel to make their copy onto one sheet, rather than several sheets. Other places
the Card Shot would be helpful include the DMV or a car dealership where a license
and other identification materials have to be produced.
HOW
Pre-requisite
To complete the steps listed for the Card Shot function, confirm 8.5" x 11" paper
isloaded LEF (Long Edge First) in the top drawer, and a business card, hotel room
key, insurance card or driver's license is available. First, ensure that Administrator
Security Level 1 is enabled, which provides access to the Card Shot function without
having to enter the Administrator Mode. Administrator Security Level set to Prohibit
disallows changes to the Card Shot function in User Settings.
To Next Page
Loading...
Need help?
General
