Muratec MFX-C3680 Copy Guide

bizhub C754 Series/C554 Series/C364 Series/754 Series
Copy job shops
39
PROGRAM — formerly known as “Mode Memory”
Pre-requisites
This job shop instructs you in setting up 1:2 duplexing and finishing job parameters;
andthen putting these specific job parameters into memory after naming the job.
Youwill not need any samples for this job.
APPLICATIONS
The PROGRAM functionality allows a “one touch” key to be programmed for frequently
used job parameters. These “one touch” keys can then be given “job names” for easy
future access. This feature promotes a “user friendly office environment” for the end-
users. Up to 30 job programs can be stored.
Salespeople often refer to this feature as “demo in a box” because it increases theease
of operation during a selling demonstration. Rather than taking a potential client through
the multiple steps required to complete a job, saving these steps into aPROGRAM
andnaming the job (e.g., booklet, page insert), demonstrates “ease ofuse” for the client.
Steps/Keystrokes:
If not on the Home screen touch the Menu key on the Control Panel .
Touch the Copy icon.
If already on the Copy screen press the “Reset” Key before beginning this job shop.
Setting up the job parameters
1. Touch Duplex/Combine.
2. Touch 1-sided > 2-sided.
3. Touch OK.

Muratec MFX-C3680 Specifications

General

Brand	Muratec
Model	MFX-C3680
Category	Copier
Language	English