Need help?Do you have a question about the Murphy LM500 and is the answer not in the manual?
Connections| Crankcase balance vent connection | 1/2 NPTF (top) |
|---|---|
| Inlet connection | 2 x 3/4 NPTF (side) |
| Conduit connection | 1/2 inch conduit (female, top) |
Switch Specifications| Snap-switch SPDT rating (AC) | 10 A, 125 VAC |
|---|---|
| Snap-switch SPDT rating (DC) | 0.5 A, 125 VDC, 10 A, 30 VDC |
Pressure and Temperature| Maximum inlet pressure | 9.50 psi/25 ft. oil (head pressure) |
|---|---|
| Maximum differential pressure | 2 in (51mm) between running and stopped |
| Maximum ambient temperature | 250°F (121°C) |
Physical Characteristics| Wire leads length | 14 in +/- 2 in (355 mm) |
|---|---|
| Case material | Die cast aluminum |
| Lens material | Clear “Frog Eye” non-staining, high impact, high temperature nylon |
To Next Page
