EasyManuals Logo

Musical Fidelity LX2-HPA User Manual

Musical Fidelity LX2-HPA
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LX
2
-HPA Headphone Amplifier
Instruction Manual
Introduction
Thank you for purchasing the LX
2
-HPA. We
sincerely hope that it will bring you many years
of outstanding listening pleasure.
Installation Precautions
Your new LX
2
-HPA is designed and built to
provide trouble-free performance, but as with all
electronic devices, it is necessary to observe a
few precautions:
Do not use the LX
2
-HPA near water. The unit
must not be exposed to dripping or splashing
and no objects lled with liquids, such as vases,
must be placed on the unit.
Keep the LX
2
-HPA away from heat such as
radiators. No naked flame sources, such as
lighted candles, should be placed on the unit.
Power Supply Note:
Only use approved Musical Fidelity DC power
supply. The use of other adaptors or supplies
could seriously damage the LX
2
-HPA.
This Hi-fi product has been tested to ensure
that its operation is not adversely affected by
normal background levels of Radio Frequency
Interference (R.F.I.), and that it does not itself
generate excessive amounts of interference.
However, if a problem persists, please contact
your Musical Fidelity agent.
Never open the case of the LX
2
-HPA yourself, as
this will invalidate the guarantee.
Place all connecting cables where they are not
likely to be walked on or trapped by items placed
on them.
The LX
2
-HPA will operate in accordance with its
specications within the following environmental
range:
Temperature 5 to 45 degrees Celsius
Humidity 10 to 90% non condensing
There are no user adjustments inside. Please
refer all service work to an authorised Musical
Fidelity agent.
HPA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Musical Fidelity LX2-HPA and is the answer not in the manual?

Musical Fidelity LX2-HPA Specifications

General IconGeneral
TypeHeadphone Amplifier
Power Output1.5W into 32 Ohms
Frequency Response10 Hz - 100 kHz
Input Impedance47k Ohms
Headphone Output6.3mm (1/4") Jack
Total Harmonic Distortion<0.01% (1kHz, 1V)
InputsRCA
Signal-to-Noise Ratio>100dB (A-weighted)

Related product manuals