Musical Fidelity LX2-LPS User Manual

LX
2
-LPS Dual Input Phono Stage
Instruction Manual
Introduction
Thank you for purchasing the LX
2
-LPS. We
sincerely hope that it will bring you many years
of outstanding listening pleasure.
Installation Precautions
Your new LX
2
-LPS is designed and built to
provide trouble-free performance, but as with all
electronic devices, it is necessary to observe a
few precautions:
Do not use the LX
2
-LPS near water. The unit
must not be exposed to dripping or splashing
and no objects lled with liquids, such as vases,
must be placed on the unit.
Keep the LX
2
-LPS away from heat such as
radiators. No naked flame sources, such as
lighted candles, should be placed on the unit.
Power Supply Note:
Only use approved Musical Fidelity DC power
supply. The use of other adaptors or supplies
could seriously damage the LX
2
-LPS.
This Hi-fi product has been tested to ensure
that its operation is not adversely affected by
normal background levels of Radio Frequency
Interference (R.F.I.), and that it does not itself
generate excessive amounts of interference.
However, if a problem persists, please contact
your Musical Fidelity agent.
Never open the case of the LX
2
-LPS yourself, as
this will invalidate the guarantee.
Place all connecting cables where they are not
likely to be walked on or trapped by items placed
on them.
The LX
2
-LPS will operate in accordance with its
specications within the following environmental
range:
• Temperature 5 to 45 degrees Celsius
• Humidity 10 to 90% non condensing
There are no user adjustments inside. Please
refer all service work to an authorised Musical
Fidelity agent.
MM
POWER
ON
OFF
EPS
MC
SELECT

Musical Fidelity LX2-LPS Specifications

General

MM Input Sensitivity	2.5 mV
MM Input Impedance	47 kΩ
MC Input Impedance	100 Ω
Gain (MM)	40 dB
Gain (MC)	60 dB
THD (MM)	<0.01%
Output Impedance	100 Ω
Type	Phono Stage
THD (MC)	<0.01%
RIAA Accuracy	+/- 0.5dB
Signal to Noise Ratio (MM)	85dB
Signal to Noise Ratio (MC)	75dB
Frequency Response	20 Hz - 20 kHz
Power Supply	12V DC

Summary

Installation Precautions

Water and Liquid Safety

Avoid placing the unit near water or using it where it could be splashed.

Heat and Flame Safety

Keep the unit away from radiators and naked flames.

Approved Power Supply

Only use the approved Musical Fidelity DC power supply to avoid damage.

Cable Placement

Route cables safely to prevent them from being walked on or trapped.

Operating Environment

Operate within specified temperature (5-45°C) and humidity (10-90%) limits.

Warranty and Service Guidelines

Do not open the unit yourself; refer service to an authorised agent.

Connections Guide

Input Connections

Connect turntable outputs using RCA leads to MM or MC inputs.

Output Connections

Connect LX2-LPS outputs to the amplifier's line-level inputs.

Power Connection

Plug the DC connector into the unit and the adapter into the wall socket.

Enhanced Power Supply (EPS)

Connect Musical Fidelity EPS for optimum performance; EPS LED confirms readiness.

Earthing Procedure

Connect turntable earth wire to the terminal if hum is apparent.

Unit Usage

The product can be left on indefinitely; the adapter may become warm.

Specifications and Troubleshooting

Technical Specifications

Details input impedance, sensitivity, distortion, signal/noise, and overload margin for MM/MC.

General Information

Covers RIAA response and power requirements.

Connection Details

Lists RCA sockets for inputs/loading and DC jack for power input.

Physical Dimensions and Weight

Provides length, width, height, and weight for the unit and packed unit.

Included Accessories

Lists the Power Supply as an included accessory.

Basic Troubleshooting

Provides solutions for common issues like no power, no sound, and hum.

Item Disposal Information

European Disposal Guidelines

Explains the crossed-out wheeled bin symbol and proper disposal methods.

Multilingual Disposal Instructions

Provides disposal information in English, French, Spanish, Italian, German, Dutch, Finnish, and Greek.