Mutable Instruments ambika - Page 22

trig (trigger)
: LFO/envelope synchronization mode.
free
leaves the
LFO
free-running.
env->lfo
resets the phase of the
LFO
everytime a new note is played.
lfo->env
retriggers the corresponding
envelope generator everytime the
LFO
completes a cycle.
attk (attack)
: Envelope attack time, from 1ms to 66s.
deca (decay)
: Envelope decay time (same times as for attack).
sust (sustain)
: Envelope sustain level.
rele (release)
: Envelope release time (same times as for attack).
Here is a list of
LFO
waveforms:
tri
: Triangle.
sqr
: Square.
s&h
: Sample & hold (random value).
ramp
: Ascending ramp (use a negative modulation amount in the modulation matrix to get a
descending ramp modulation).
sine
to
stp2
: Wavetable LFOs. These LFOs are read from a wavetable containing many interesting
waveshapes.
Voice
LFO
(S3)
rate 24|wave tri
rate
:
LFO
rate. The
voice lfo
cannot be synchronized to the tempo. The frequency ranges from 0.06
Hz (0) to 100 Hz (127).
wave (waveform)
:
LFO
waveform.
Modulation matrix and modifiers (S4)
Modul. 1|srce env1|dest prm1|amnt 0
Ambika – User manual | Mutable Instruments http://mutable-instruments.net/ambika/manual
22 of 44 2/17/17 4:58 PM