The Ambika parameters are organized in
. To jump to a page, press one of the 7 switches
. Some pages share the same switch ; and you will need to repeatedly press a switch to cycle
between those pages. The active page is indicated by the LEDs
The following table lists which page is associated with each switch:
Envelopes and LFOs, voice
Keyboard & tuning, sequencer & arpeggiator, sequence editor
Voice and parts mappings, Tempo/clock
Performance, knob assignments
Each page displays up to eight related synthesis parameters. Each parameter can be edited by
turning the knob sitting at its top (for the first row of the display) or at its bottom (for the second row of
After having powered up the unit, press
to bring the oscillators page.
lights up in green, and the
display shows the following parameters:
Wave saw|para 0|rang 0|tune 0
wave squa|para 32|rang -12|tune 12
You can use the first row of knobs to edit the shape, parameter, range and detune of the first oscillator
; and the second row of knobs to edit the shape, parameter, range and detune of the second
oscillator. Observe that when you are turning a knob, the explicit name of the parameter is temporarily
Ambika – User manual | Mutable Instruments http://mutable-instruments.net/ambika/manual
5 of 44 2/17/17 4:58 PM