displays, most of the time, the name and values of the 8
synthesis parameters accessible by the 8 potentiometers
. The parameters are organized as two
is used to scroll between parameters/pages, or to fine-tune the value of a
indicate which page is active.
are used to display synthesis pages. For example,
shows the filter page, etc.
indicate which part is active (green lights), and which voicecards
are currently playing notes (yellow lights).
is used to visualize the rate of a
or the beats in a sequence — depending on
which module you are editing.
Ambika – User manual | Mutable Instruments http://mutable-instruments.net/ambika/manual
4 of 44 2/17/17 4:58 PM
To Next Page
Loading...
