7
The chassis
Unfold the chassis (a, b)
· Press the folding safeguard inwards (a1) and tilt the upper chassis until
the lower support clicks into place (a2) and move the pushbar back-
wards until you hear a second click (b).
· If you unfold the chassis, with the pushchair seat tted to the chassis,
you then have to manually raise the front brace afterwards.
· Before use always check that the pram has been unfolded and secured
correctly.
Fold the chassis (c, d)
· Stand behind the chassis and put the chassis on the brake. Push the
height adjustment button (c1) of the pushbar in and move this to the
lowest setting. Pull the folding safeguard (c2) towards you on both
sides and turn the pushbar forwards until the pushbar lies on the
frame (c3).
· Pinch the chassis unlocking buttons and fold the chassis (d).
· The folding safeguard locks automatically when the product is folded up.
· The integrated carry handle, which is located under the rear axle, has
made lifting and carrying the folded pushchair more practical.
The wheels
Assemble the rear wheels (e)
· Slide the axle of the rear wheel in the rear wheel casing until you hear a
click. Pull the wheel to check that it has been attached rmly.
Disassemble the rear wheels (f)
· Press the button on the inside of the rear wheel casing and take the
wheel o the chassis
Assemble the front wheels (g)
· Slide the axle of the front wheel upwards in the front wheel casing until
you hear a click. Pull the wheel to check that it has been attached rmly.
Disassemble the front wheels (g)
· Push the button on the front side of the front wheel and pull the wheel
from the front wheel casing.
The swivelling wheels (h)
· Turn the ring above the front wheel inwards on both sides in order to
block the swivel setting. The swivelling wheels will automatically be
locked when the wheels are placed in the rear direction.
To Next Page
Loading...
